Maintenance
130
Coolant Level Adjustment
Warning
Do not remove the expansion tank or
radiator pressure cap when the engine
is hot.
When the engine is hot, the coolant
inside the radiator will be hot and also
under pressure.
Contact with this hot, pressurized
coolant will cause scalds and skin
damage.
Caution
If hard water is used in the
cooling system, it will cause scale
accumulation in the engine and
radiator and considerably reduce the
efficiency of the cooling system.
Reduced cooling system efficiency
may cause the engine to overheat and
suffer severe damage.
2
1
3
1. Coolant expansion tank cap
2. MAX mark
3. MIN mark
To adjust the coolant level:
•
Allow the engine to cool. The coolant
level should be adjusted when the
engine is cold.
•
Position the motorcycle on level
ground and in an upright position.
•
The coolant level must be between
the MAX (upper line) and MIN (lower
line) marks in the coolant expansion
tank.
•
Remove the coolant expansion tank
cap from the coolant expansion
tank.
•
Add coolant mixture through the
filler opening until the level reaches
the MAX mark.
•
Reinstall the coolant expansion tank
cap.
Coolant Change
It is recommended that the coolant
is changed by an authorized Triumph
dealer in accordance with scheduled
maintenance requirements.
Radiator and Hoses
Warning
The fan operates automatically when
the engine is running.
Always keep hands and clothing away
from the fan.
Contact with the rotating fan may
cause an accident and/or personal
injury.
To Next Page
Loading...
