Triumph Rocket 3 R User Manual

General Information
86
• Install the seat washers and
nuts, attaching the seat strap, if
applicable. Tighten the seat nuts to
27 lbf in (3 Nm).
• Install the main seat nut and
tighten to 27 lbf in (3 Nm).
Seat Backrest (if equipped)
Warning
To prevent detachment of the
backrest during riding, after adjusting
always grasp the backrest and pull
firmly upwards.
If the backrest is not correctly secured
in position, it will detach from it's lock.
A loose or detached backrest may
cause loss of motorcycle control and
an accident.
The passenger seat backrest is
adjustable.
1
1. Backrest adjustment lever
To adjust the backrest:
•
Push and hold the lever forward
towards the front of the motorcycle.
•
Move the backrest pad up or down
to adjust the position for the
passenger.
•
Once the backrest is in the correct
position, release the lever.

Triumph Rocket 3 R Specifications

General

Displacement	2458 cc
Bore x Stroke	110.2 mm x 85.9 mm
Compression Ratio	10.8:1
Max Torque	221 Nm @ 4, 000 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Shaft
Gearbox	6-speed
Swingarm	Single-sided, cast aluminium
Front Tyre	150/80 R17 V
Rear Tyre	240/50 R16 V
Seat Height	773 mm
Dry Weight	291 kg
Wheelbase	1677 mm
Engine Type	Liquid-cooled, DOHC, inline 3-cylinder
Max Power	165 hp (123 kW) @ 6000 rpm
Exhaust	Stainless steel 3 into 1 headers with 3 exit silencer
Clutch	Hydraulic, torque assist
Frame	Full aluminium frame
Front Suspension	Showa 47 mm upside-down
Rear Suspension	Showa monoshock with piggyback reservoir, adjustable
Front Brakes	Brembo Stylema® 4-piston radial monobloc calipers
Rear Brakes	Brembo 4-piston monobloc caliper
Front Wheel	17 x 3.5 in
Rear Wheel	16 x 7.5 in
Fuel Tank Capacity	18 L
Instrument Display	TFT multi-functional instrument pack with digital speedometer, trip computer, digital tachometer, gear position indicator, fuel gauge, service indicator, ambient temperature, clock and rider modes