Troxler EGauge Combo 4540 - Page 46

3–12
Setting Measurement Units
The gauge can display measurement results in either U.S. units
pounds per cubic foot (pcf) or metric (SI) units (kg/m
3
or
g/cm
3
). To select the units, press 3 at the Options menu. The
gauge displays:
Select the new units using the corresponding number key. The
gauge sets the new units and returns to the Setup menu.
NOTE:
The active selection is noted by the asterisk
- UNITS –
1. pcf *
2. kg/m3
3. g/cm3