Troxler EGauge Combo 4540 User Manual

8–6
Erase Projects
To erase either a selected project file or all project files, press
4 at the Projects menu. The gauge displays the Erase menu:
 To erase a single project, press 1. If more than one
project has been created, the gauge displays:
Use the arrow keys to scroll through the project names
displayed on the first line. When the gauge displays the
desired project, press ENTER/START. At the Are you
sure? prompt, press the YES key. The gauge erases the
project and returns to the Projects menu.
 To erase all projects, press 2 at the Erase menu. At the
Are You Sure? prompt, press the YES key. The gauge
erases all the projects and returns to the Projects menu.
Arrows for Scroll
<ENTER> to Select
↨
Prj: XXXXXX
Erase:
1. One Project
2. All Projects
Press # to Select

Troxler EGauge Combo 4540 Specifications

General

Brand	Troxler
Model	EGauge Combo 4540
Category	Measuring Instruments
Language	English