Project Menu
The gauge can store up to 1000 readings. The Project and Store
functions allow handling of measurement data. Measurement
results are stored in files (memory locations) called projects,
which are named by the operator.
Projects are managed using the Projects menu. From this menu,
the operator can select a project (make an existing project
active so that additional data may be added to it), view project
data, create a new project, erase projects, output project data to
the selected destination (via the serial or USB port), deactivate a
project, and enable the Auto-Store function.
To access the Projects menu, press PROJ. The gauge displays:
NOTE
The PROJ key is active only when the Ready screen
is displayed.
Use the arrow keys to scroll through the menu options. Use the
numeric keys to select a menu option. Press ESC to return to
the Ready screen.
To Next Page
Loading...
Need help?
General
