Create a Project
To create a new project, press 3 at the Projects menu. The
gauge displays:
Press the ALPHA LOCK key to enable the alphabetic keys on
the gauge. When the alphabetic keys are enabled, the symbol A
appears in the upper right of the display, as shown above.
Enter the project name (up to twelve alphanumeric characters)
and press the ENTER/START key. The gauge displays:
To save the new project name without activating it, press
NO. The gauge saves the new project, briefly displays
the name of the active project (if any) and returns to the
Projects menu.
To save the new project name and activate the project,
press YES. The gauge enables the new project, displays
a brief confirmation message, and returns to the Projects
menu.