View Project Data
The gauge offers two methods of viewing data. You can either
view the last measurement results using the Recall function (see
page 4–20), or any measurement results, including project
notes, stored in a project file using the View function available
from the Projects menu.
To view data stored in a project file, press 2 from the Projects
menu. The gauge displays:
Use the arrow keys to scroll through the project names. Press
ENTER/START when the gauge displays the desired project
name. If any measurement data has been stored in the selected
project file, the gauge displays the data for the first
measurement.
Six screens of information are displayed for each measurement.
Use the up and down arrows to scroll through the project data.
Press the ESC key to return to the project selection screen
shown above.
To Next Page
Loading...
Need help?
General
