Troxler EGauge Combo 4540 - Set Output Destination

Model 4540
8–9
Set Output Destination
To select the output destination, press 6 at the Projects menu.
The gauge displays:
Option 1 – Serial Port
Selecting Option 1 Serial Port allows the data to output to either a
computer or serial printer connected to the serial port.
Option 2 – USB Printer
Selecting Option 2 USB Printer allows the data to output to a printer
connected to the USB Port.
Option 3 – USB Storage
Selecting Option 2 USB Storage allows the data to output to a
storage device connected to the USB Port
Option 4 - Bluetooth
Selecting option 4 Bluetooth allows the data to output to a
Bluetooth enabled device for future uploading of projects.
Upon choosing Option 5 “Output Project” from the project menu,
the following screen appears.
Complete Pairing on the Bluetooth enabled device.
A Confirmation screen displays once pairing is successful.
Output Destination: ↨
1. Serial Port
2. USB Printer
3. USB Storage
Output Destination: ↨
4. Bluetooth
Awaiting Connection
Pair & Connect Using
Bluetooth Device
ESC to Abort