Tsuruga 3587 - Setting Configuration Flow

- 9 - MODEL 3587
3.4 Setting flow
3.4.1 MEMORY SET flow
SYSTEM SET
F4[ENT]
GENERAL SET
F4[ENT]
MEMORY SET
F4[LOCK]
F1[SET]
F4[ENT]
F2[RCL]
F1[SEL]
F1[SEL]
F1[SEL]
Measurement screen flow
Initial screen after power onMeasurement screen
Memory selection from No. 1 to 10
Invalid key operation from F1 to F3
Setting screen
SETTING MODE
3.4.1 Refer to MEMORY SET flow
3.4.2 Refer to GENERAL SET flow
3.4.3 Refer to SYSTEM SET flow
MEMORY No 1
TEST MODE AUTO
VOLTAGE 1000V
RANGE 2000MΩ
F4[ENT]
F4[ENT]
HIGH SET 9990MΩ
LOW SET 0020MΩ
COMP RNG 2000MΩ
F4[ENT]
TIMER 10.0s
MASKTIMER 00.5s
MEMORY SET 1/3
MEMORY SET 2/3
MEMORY SET 3/3
Fanction
to measurement screen
Memorize and return
Note: When RANGE is selected, if F1「SEL」key is
Fanction
Fanction
to measurement screen
Memorize and return
to measurement screen
Memorize and return
Note: When COMP RNG is selected, if F1「SEL」key is
Note: When MASK TIMER is selected, if F1「SEL」key is
Measurement screen
Contents
Contents
Contents
F1[SEL] Operation of function (Downward only）
F1[SEL] Operation of function (Downward only）
F1[SEL] Operation of function (Downward only）
F2[▲]、F3[▼] Switching between contents
F2[▲]、F3[▼] Switching between contents
pressed, 2/3 of the screen is switched
pressed, 3/3 of the screen is switched
pressed, 1/3 of the screen is switched
to MEMORY SET.
to MEMORY SET.
to MEMORY SET.
F2[▲]、F3[▼] Switching between contents