100
Control Box shutdown / Reboot：
Access to Control Box Shutdown
● Access to 【Settings】-【System Settings】-【System Information 】
Shutdown / Reboot
The control box can be shut down or restarted. Note that the shutdown / reboot button
does not turn off the power supply and the main power supply to the robotic arm.
【xArm Shutdown】
● Click this button, the page will go back to the【Search the IP Address of the
Control Box】 page, and the control box will shut down. This operation is
equivalent to long pressing the Power button of the control box, and the shutdown
process takes 2 to 3 seconds.
【xArm reboot】
● Click this button, the control box of the robotic arm will restart. After the restart
action is completed, the pop-up window will close and the robotic arm will be
automatically reconnected. The operation is equivalent to the shutdown and startup
process of the control box, and restart process takes 3 to 4 seconds.
Note: The 【xArm shutdown】 and【 xArm Reboot】buttons do not affect the main
power supply of the control box and the power supply of the robotic arm.
To Next Page
Loading...
Need help?
General
