120
1.6.2.3 Move/Wait/Edit
For some common functions of the motion commands, click【move】 and the
robotic arm will move to the current position; click【edit】, Then the robotic arm
will move to the current position and open the live control interface; Wait (true/false),
indicating whether to wait for the execution of a command before sending the next
one.
1.6.3 Blockly Code Block
Setting: Used to set the running speed, acceleration, collision sensitivity, load, etc. of
the robotic arm.
Motion: Common motion commands including linear motion, joint motion, linear
motion with arc, sleep time, zero point, and emergency stop.
Application: You can import Blockly other projects.
GPIO: External input signal triggered event (suitable for plc).
End-Effector: Contains common commands to control the end-effector, such as
gripper, vacuum gripper.
Logic: Contains commonly used logic commands.
Loop: Contains common loop commands such as multiple loops, infinite loops, and
breaking loops.
Math: Contains commands for mathematical operations.
Advanced: Includes location notes and message reminders.
To Next Page
Loading...
Need help?
General
