76
【Offline Task】
● Offline Task can add multiple Blockly to be triggered through programs I/O, and
without the need for computer and network. As shown in the figure above, CI4 is
set to the function of Offline Task and a Blockly project is added. Click 【 】
to add a Blockly project, and click 【 】 to delete the project.
【Manual Mode】
● When setting to the function of Manual Mode, the robotic arm can be dragged
freely when the input signal remains low power levels.
【Save】
● Save the changes.
【Cancel】
● Discard the changes.
To Next Page
