Unify OpenScape CP110 - Programming the Function Keys; Configuring Function Keys

Programming the function keys 32
Programming the function keys
The phone features a range of functions that can be attributed to the pro-
grammable function keys. The phone comes with programmable keys that can be
programmed on two separate levels.
After programming a function key, a “label” must be assigned to each cor-
responding function.
This feature must be activated using the administrator access via the local phone
or the WBM.
l
The keys are preassigned in the as-delivered state (see ).
l
The keys can also be programmed via the WBM interface (see "Web inter-
face (WBM)" à page 89).
Configuring function keys
The available functions depend on your configuration. If a function is missing,
consult your administrator.
Example: Configuring a "park key"
Open the menu.
Key function?
Select and confirm the option shown.
Press a function key.
Change?
Confirm the option shown.
More features?
Select and confirm the option shown.
Park?
Confirm the option shown.
Save & exit?
Confirm the option shown.
Pressing the key briefly activates the programmed function. For functions that
can be switched on or off, such as second call, press once to switch the func-
tion on and press again to switch the function off.