Unify OpenScape CP110 - Leaving an Absence Text; Deleting an Absence Text; Assigning a Phone Number (Not for US)

Making calls 48
LEAVING AN ABSENCE TEXT
You can leave messages or absence notices on your phone's display for internal
callers who wish to contact you in your absence.
When you receive a call, the message appears on the caller's display.
Open the idle menu.
Absence text on?
Select and confirm the option shown.
0 = Will return at:
l
Select the predefined text and confirm.
The text can be adapted by the administrator.
…
l
Optionally, enter the code directly. The code is shown on your display with
the corresponding message.
Predefined messages with a colon can be completed by entering a digit.
Enter message text?
l
Optionally, select and confirm the option shown.
Enter the message text (up to 24 characters).
Save & exit?
Confirm the option shown.
DELETING AN ABSENCE TEXT
Open the idle menu.
Absence text off?
Select and confirm the option shown.
ASSIGNING A PHONE NUMBER (NOT FOR US)
If this function has been configured, you can selectively assign a specific number
(DID number) to your telephone before making an external call. The assigned num-
ber then appears on the called party's display.
Open the menu.
Settings:
Select and confirm the option shown.
*41 = Temporary MSN?
Select and confirm the option shown.
Enter the DID number you wish to use.
Dial the external phone number.