Making calls in an executive / secretary team 58
Making calls in an executive /
secretary team
Lines
A distinction is made between primary and secondary lines. Each of these line
types can be used on a private or shared basis.
l
Primary line: All multi-line telephones have a primary line. This line can be
reached in the usual manner via your public phone number. Incoming calls
to your phone number are signalled on this line.
l
Secondary line: A secondary line on your phone is used as a primary line by
another subscriber. Your primary line, which is configured on another tele-
phone, simultaneously functions as the secondary line on that telephone.
l
Private line: A line that is used by a single telephone. This line cannot be
used as a secondary line by another telephone.
l
Shared line: A line that is configured on multiple telephones. The line status
is displayed for all telephones that share this line (if configured). If, for
example, a shared line is being used by a telephone, a status message indic-
ating that this line is busy is displayed on all other telephones.
l
Direct call line: A line with a direct connection to another telephone.
You can see the status of the line from the LED display.
Line or trunk keys
The programmable keys on multi-line phones function as line or trunk keys. Every
key programmed as a line key corresponds to one trunk with the result that you
can configure up to four trunks in an Desk Phone CP110.
As a team member, you can independently program the following functions on
keys (see "Programming the function keys" à page 32):
l
Direct destination selection
l
Group call on or off
(not available on executive phone in an executive or secretary team)
l
Ring transfer on or off
(only in an executive or secretary team)
To Next Page
Loading...
