Web interface (WBM)
You can configure a number of settings for your phone via the “Web Based Man-
agement” (WBM). The information is transferred via a secure HTTPS connection.
Access to the web based management must be activated by the administrator.
Launching the web interface
1. To launch the interface, open a web browser and enter one of the following
addresses:
l
https://[IP address of the phone]
[IP address of the phone] is the IP address of your phone.
l
https://[Name of the phone]
[Name of the phone] that was assigned by the administrator.
2. You might receive a certificate notification from the browser. Follow the
instructions to download the certificate.
3. You will be prompted to configure a user password the first time you call up
the WEBM interface (see ). You must log in with this password the next time
you want to open the “User settings”.
Administrator settings
This area lets you configure settings for administering your phone and the network
environment. Access to the “Administrator settings” is protected by the admin-
istrator password.
For further information, consult the administrator or refer to the administration
manual.
Logging into the user settings
The web interface homepage opens once you have entered and confirmed the
phone's IP address.
1. Enter the user password, if required.
2. Click a menu heading to display the individual menu entries.
3. Click the menu heading again to close the menu.
4. Click a menu entry to open the corresponding form.
Web interface (WBM) 89
To Next Page
Loading...
