Making calls in an executive / secretary team 60
l
Optionally, hang up the handset.
Release
l
Optionally, press the "Release" key.
Depending on the configuration, this may be necessary so other team members
can also pick up the call on hold.
Retrieving the call
Line
Press the line key, above which the text label is flashing slowly or is shown inverse.
Making calls on multiple lines alternately
Prerequisite: You are conducting a call via one of your group's trunks. Another line
key is flashing.
Line 1
Press the line key. The first call party is on hold on the other trunk.
Line 2
Press the line key that is flashing slowly or is shown inverse. The second call party is
on hold.
You can switch between lines as often as you wish. Press the line key each time.
MULAP privacy release
If configured, you can program a key on your phone with the function "Privacy
Release" (see "Configuring function keys" à page 32).
If you program this key, you do not have to use the menu to set up a conference.
Your team partner only has to press the flashing line key associated with your trunk
on his or her phone to immediately join the conference.
You are conducting a call.
Priv Release
Press the key shown.
Up to three team members can now join the conference.
Prerequisite: The trunk on which you are speaking is configured on the other
phone as a line key.
Line
Press the line key.
To Next Page
Loading...
