Unify OpenScape CP110 - Dialling with Speed-Dial Keys; Talking to an Internal Party with a Speaker Call; Automatic Connection Set-Up (Hotline); Sending a Message

Making calls 46
DIALLING WITH SPEED-DIAL KEYS
Prerequisite: You have configured speed-dial keys (see "Configuring a speed-dial
key" à page 30).
Open the menu.
*7 = Speed dial?
Confirm the option shown.
Press the key shown.
…
Press the required speed-dial key.
TALKING TO AN INTERNAL PARTY WITH A SPEAKER
CALL
You can place a speaker call to an internal party using the loudspeaker on their tele-
phone.
Open the idle menu.
*80 = Speaker call?
Select and confirm the option shown.
Enter the phone number.
For responding to a speaker call, see "Using the speakerphone" à page 37.
AUTOMATIC CONNECTION SET-UP (HOTLINE)
If this function is configured, the system automatically sets up a connection to a
pre-set internal or external destination.
Lift the handset.
Depending on the setting, the connection is either set up immediately or only after
a pre-set period of time.
SENDING A MESSAGE
You can send short text messages to individual stations or groups of stations with
system telephones.
Creating and sending a message
Open the idle menu.