For more information on setting up a ringing group if your telephone operates
with system networking via LAN, see "Ringing group" à page 85).
Saving, displaying and deleting telephones for the ringing group
Open the menu.
*81 = Ringing group on?
Select and confirm the option shown.
Follow the display prompts and enter the internal phone number.
If your phone belongs to a ringing group, your display will show the phone num-
ber or the name of the initiator on the upper line and that of the caller on the
lower line.
Removing all telephones in a call ringing group
Ringing group off?
Select and confirm the option shown.
Uniform Call Distribution (UCD)
If configured, you may belong to a group of users (agents), to which calls are dis-
tributed.
An incoming call is always assigned to the agent idle the longest.
Logging on and off at the beginning and end of your shift
Open the menu.
UCD?
Select and confirm the option shown.
*401=Log on?
l
Confirm the option shown.
#401=Log off?
l
Optionally, select and confirm the option shown.
To log on, enter your identification number ("Agent:"). Contact your Admin to find
out what it is.
Logging on and off during your shift
Open the menu.
UCD?
Select and confirm the option shown.
#402=Not available?
l
Confirm the option shown.
*402=Available?
l
Optionally, select and confirm the option shown.
Group call/ hunt group 67
To Next Page
Loading...
