Hang up the handset.
If a connection is not set up between the other two parties within a configurable
time, e.g. 40 seconds, you will be called again. You are reconnected with the
first party.
PARKING A CALL
You can park up to ten internal or external calls. Parked calls can be displayed and
picked up on another telephone. This feature is useful if you want to continue a
call at another phone for example.
Prerequisite: You are conducting a call.
Open the menu.
*56 = Park a call?
Select and confirm the option shown.
…
Enter the number of the park position (0 – 9) and make a note of it. If the park pos-
ition number you entered is not displayed, it is already in use. In this case, enter
another one.
Retrieving a parked call
Prerequisite: One or more calls have been parked. The phone is idle.
Open the menu.
#56 = Retrieve call?
Select and confirm the option shown.
…
Enter the park position number you noted earlier.
If the park slot number you enter is not in use, you cannot retrieve the call.
If a parked call is not picked up, the call is returned to the telephone from where
it was parked (recall) after a specific period of time.
HOLDING A CALL
You can place a call partner on hold. The call partner hears music on hold.
Hold
Press the key, if configured.
The key "Hold" must be configured as a programmable key.
Making calls 55
To Next Page
Loading...
