Unify OpenScape CP110 - User Password; Changing the Password

Privacyand security 72
*93=Change PIN?
Confirm the option shown.
Enter the current five-digit PIN.
If you have not yet set a PIN, use "00000" as the initial PIN.
Enter the new PIN.
Re-enter the new PIN.
If you forget your code, consult the administrator, who can reset your code.
User password
Your password protects your individual configurations. The administrator may
have configured the following settings:
l
The password is deactivated: You do not have the option of configuring
user settings. The message "Password is disabled" is displayed.
l
The password is temporarily locked: You do not have the option of con-
figuring user settings at this time. The message "Password is suspended" is
displayed.
l
After initially logging on to a user area, you may have to replace the default
password with a new password.
l
A password can have a predefined period of validity: You will have to create
a new password when the period ends. The message "Password warning"
will alert you to this at the appropriate time. The message "Password has
expired" appears when the validity period is over. Confirm "Password must
be changed" and change the password as described in this section.
l
If you repeatedly enter the wrong password (2 to 5 times), additional
attempts are blocked. You can make another attempt after a predefined
time.
l
It is possible that you will not be able to re-use a previously used password
for a period of time, which means you have to create another "new pass-
word".
The administrator can tell you about the rules for what and how many char-
acters can or must be used in the password.
CHANGING THE PASSWORD
The preset password "000000" corresponds to a blank password. In other
words, the phone cannot be locked and the user menu is not password pro-
tected.