Group call/ hunt group 66
301 X = Group name
If an "X" appears between group or trunk number (such as 301) and the group
name, the audible tone is active for this group or trunk. No "X" means that the aud-
ible tone is deactivated.
You have the following options:
Next?
l
Confirm the option shown. The next group or trunk number is displayed
with a group name.
Leave hunt group?
l
Select and confirm the option shown. The audible tone for the group or
trunk displayed is deactivated.
Join hunt group?
l
Select and confirm the option shown. The audible tone for the group or
trunk displayed is activated.
#=Leave all groups?
l
Select and confirm the option shown.
The audible tone for all groups and trunks is deactivated.
*=Rejoin all groups?
l
Select and confirm the option shown.
The audible tone for all groups and trunks is activated.
If you have activated the audible tone for another group or trunk, or deactivated
the audible tone for all groups or trunks you belong to, you will hear a special
dial tone when you lift the handset.
Picking up a call for another member of your
team
You can use your own telephone to pick up calls for other telephones in your
team, even while on a call (call pickup groups).
In contrast to the DDS function, you do not need to have programmed a DDS key
(see "Direct destination selection keys" à page 61).
Prerequisite: Your telephone rings briefly. "Call for:" is displayed with the phone
number or name of the originator. The phone number or name of the caller
appears on the lower line.
Pickup - group?
Confirm the option shown.
Ringing group
You can have calls for your telephone signalled audibly at up to five other internal
phones. The phone that answers the call first receives the call.
To Next Page
Loading...
