Unify OpenScape CP110 - Making Calls Using System Speed-Dial Numbers

Display next?
Select and confirm until the required entry is displayed.
If calls are available, the first call is displayed with date and time. You are informed if
the subscriber is currently free or busy.
Call Sender?
Select and confirm to dial the subscriber displayed.
Deleting an entry in the call lists
Missed Calls?
Press the function key for the call log.
The call log is opened. You are immediately in the "Calls in queue" list.
Quit and return?
/
Select and confirm to select a different list if necessary.
l
Optionally, open the idle menu in idle status.
Calls in queue?
Select and confirm the list of unanswered calls.
Incoming calls?
l
Optionally, select and confirm the list of answered calls.
Outgoing calls?
l
Optionally, select and confirm the list of dialled calls.
Display next?
Select and confirm until the required entry is displayed.
Delete?
Select and confirm if you no longer require the entry.
Quit and return?
Exit the call log by selecting and confirming twice.
MAKING CALLS USING SYSTEM SPEED-DIAL
NUMBERS
Prerequisite: You know the system speed-dial numbers.
Open the menu.
*7 = Speed dial?
Select and confirm the option shown.
Enter a three-digit speed-dial number.
If necessary, you can suffix-dial additional digits (e.g. the user’s extension) at the
end of the saved phone number.
If configured, a suffix is automatically dialed (e.g. "0" for the exchange) if no
entries are made within 4 or 5 seconds.
Making calls 45