Unify OpenScape CP110 - Transferring Calls Directly to the Executive Phone

Line
l
Press the required line key.
l
Enter the required trunk number.
Fwd Line
l
If available, press the key shown.
If you have activated call forwarding for a trunk, a special dial tone sounds when
the line is seized.
Understanding LED messages on the "CFW MULAP"
Fwd Line
l
The notification for the “Fwd Line” key is off – call forwarding is not active for
this trunk.
Fwd Line
l
The notification for the “Fwd Line” key is on – call forwarding is active for this
trunk.
Fwd Line P.
l
The notification for the “Fwd Line” key flashes slowly - the trunk is the des-
tination of call forwarding.
Transferring calls directly to the executive
phone
Normally, all calls for the executive are audibly signalled only by the secretary
phone.
You can set audible signalling so calls are only signalled acoustically by the exec-
utive phone or by a second phone assigned to it.
Prerequisite: There is a key programmed with the function "Ring Transfer" on your
phone.
Activating
Ring Transfer
l
Press the key shown.
l
Optionally, open the menu.
*502 = Ring Transfer: On?
Select and confirm the option shown.
Line
l
Press the required line key.
l
Optionally, enter the required trunk number.
Deactivating
Ring Transfer
l
Press the key shown.
Making calls in an executive / secretary team 63