Unify OpenScape CP110 - Accepting Calls with the Line Keys; Dialling with Line Keys; Placing a Call on Hold on a Line Key and Retrieving the Held Call

Notification on display
The display of the status label will be controlled by the state of the key. Line or func-
tion key can be pulsing or inverted similar to a LED.
Status Meaning
Standard The line is in idle mode.
Pulsing
(a)
l
Incoming call on the line.
l
The line is on "Hold".
Inverted The line is busy.
Accepting calls with the line keys
Prerequisite: Your phone rings and/ or a text key label flashes quickly.
Line
Press the line key above which the text label flashes quickly or is shown inverse.
Lift the handset.
l
Optionally, use speakerphone mode.
Dialling with line keys
Line
Press the free line key you wish to use to establish the connection.
Dial the phone number.
l
If the party answers: Lift the handset.
l
Optionally, use the speakerphone mode.
Placing a call on hold on a line key and
retrieving the held call
Prerequisite: You are conducting a call via one of your group's trunks.
Holding
Hold
Press the key, if configured.
Making calls in an executive / secretary team 59