114
6. Place one paper towel on cartridge nozzles. Gently press the paper towel with your finger.
Leave the paper towel on the nozzles for 30-40 seconds.
7. Wipe nozzles.
a. Place the second paper towel on a flat/hard surface.
b. Press the nozzles into the paper towel.
c. Firmly tap the top of the cartridge three times to force
the ink out.
d. Wipe/Drag the cartridge in the direction indicated.
e. Repeat until all colors are seen on the paper towel. After
wiping the nozzles, the paper towel should show all
three colors. If all three colors are present, proceed to
step 8. If the paper towel doesn’t show all three colors,
then repeat step 7. If the paper towel still doesn't show
all three colors repeating step 7, then replace the
cartridge.
To Next Page
Loading...
