71
Section 5: Printing Only to Pre-Die-Cut Labels
If you don’t need to cut custom shapes, the IColor 250 is an extremely capable Pre-Die-Cut label printer.
While IColor CustomCUT can print only to the IColor 250, other dedicated printing programs offer some
advantages.
5A. Using BarTender for Pre-Die-Cut Printing
UNINET recommends BarTender for printing only. A fully functional Free Edition can be downloaded
from the BarTender website. https://www.bartendersoftware.com/free-edition-download/
When you open BarTender, you will be given the choice to select an existing label or create a new one
using a wizard. Use the following instructions as a guide through the wizard setup process.
1. Choose "Start a new BarTender document..."
To Next Page
Loading...
