84
Ink Saturation
This option controls the amount of ink used when printing an image. The default setting is 100%, which
will provide the most accurate color matching. If the ink is not drying fast enough or "bleeding", you can
decrease the Ink Saturation to lessen the amount of ink that is applied to the label.
Rotate 180 Degrees
Set this setting to Yes to print with the labels right side up as they exit the printer.
Enable Bi-di
Set to "Yes" for the fastest print speed. Requires an alignment print after every cartridge change.
Set to "No" for better quality print (in some cases).
Launch UNINET IColor PrintHub
This setting will open the UNINET IColor PrintHub application.
Details
Select this setting to see current firmware and driver version information and other printer settings.
To Next Page
Loading...
