KCC Safety Universal Robots e-Series robots have been assessed and
conform to KCC mark safety standards.
KC Registration The Universal Robots e-Series robots have been evaluated
for conformity assessment for use in a work environment.
Therefore, there is a risk of radio interference when used
in a domestic environment.
Delta Universal Robots e-Series robots are performance tested
by DELTA.
Supplier Third Party Certification
Environment As provided by our suppliers, Universal Robots e-Series
robots shipping pallets comply with the ISMPM-15
Danish requirements for producing wood packaging
material and are marked in accordance with this
scheme.
Manufacturer Test Certification
Universal
Robots
Universal Robots e-Series robots undergo continuous
internal testing and end of line test procedures.
UR testing processes undergo continuous review and
improvement.
Declarations According to EU directives
Although they are primarily relevant for Europe, some countries outside Europe recognize
and/or require EU declarations. European directives are available on the official homepage:
http://eur-lex.europa.eu.
Universal Robots robots are certified according to the directives listed below.
2006/42/EC Machine Directive
(MD)
According to the Machinery Directive
2006/42/EC, Universal Robots e-Series robots
are partly completed machinery, as such a CE
mark is not affixed.
If the UR robot is used in a pesticide
application, you must note the presence of
directive 2009/127/EC.
The declaration of incorporation according to
2006/42/EC annex II 1.B. is shown in (1.15.
Declarations and Certificates on page57).
UR10 52 User Manual
Copyright © 2009–2020 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
