Universal M-25XP - Replacing Idle Gear Bushings; Replacing Small End Bushings

REPLACING CRANKSHAFT BEARING 1
1. Prepare the necessary tool as shown in Figs (A) and (B).
2. Press out the bearing 1, using the extracting tool.
3. Insert a new bearing 1, using the inserting tool, taking due care to see that the contact edge
of bearing 1 faces the exhaust manifold side.
[A] Tool for extracting crankshaft bearing 1
[8] Tool for inserting crankshaft bearing 1
130 (5.12")
130 (5.12")
~.039"1
[C] Crankshaft and crankshaft bearing 1, as assembled
(2)
150