POINTS OF INSPECTION AND CHANGING
ENGINE LUBRICATING OIL
Brand name oil (for diesel engines) or CC/CD class oils defined by SPI. It should
be
as
follows
according
to
temperature.
SAE-30
HD
or
10W-40
HD
CHECKING ENGINE OIL LEVEL
Stop for 5 minutes or more and remove the dip stick, wipe off dip stick and recheck. Read the
engine
oil level
on
the dip stick. If the oil level is below the lower mark
on
the dip stick, add
sufficient
oil
to
the full mark.
DO
NOT
OVERFILL.
1.
Dip
Stick
2. Oil Filler Plug
CHANGING ENGINE OIL
Drain the oil while the engine
is
still warm,
by
removing the drain plug
on
the oil pan
and
oil filler
plug, or through the oil drain
hose,
so
that the oil may completely drain.
Do
not mix different brands of oil. If a different brand of oil should
be
employed, drain out the
existing
oil
no
matter how new it may
be
and
then replace
it.
Do
the same when using oil of a
different viscosity.
1.
Oil Drain Plug
42
To Next Page
Loading...
Need help?
General
