Upright LX31 Service & Parts Manual

Section
4-1LX 31/41 Work Platform
Maintenance
4.0 Introduction
Be sure to read, understand and follow all
information in the Operation Sectionof
this manual before attempting to operate
or perform service on any LX 31/41 Work
Platform.
NOTE: For Information on the engine refer to your
local engine dealer.
This section contains instructions for the maintenance of
the LX 31/41 Work Platform. Procedures for the opera-
tion inspection, adjustment, scheduled maintenance,
and repair/removal are included.
Referring to Section 3.0 will aid in understanding the
operation and function of the various components and
systems of the LX 31/41 and help in diagnosing and
repair of the machine.
Refer to Table 4-1, Preventative Maintenance Checklist,
for recommended maintenance intervals.
SPECIAL TOOLS
The following is a list of special tools which may be
required to perform certain maintenance procedures on
the LX 31/41 work platform.
0-1000 PSI Hydraulic Pressure Gauge
with Adapter Fittings
0-3000 PSI Hydraulic Pressure Gauge
with Adapter Fittings
0-30 Gallon Hydraulic Flow Meter
With 0-3000 P.S.I. Simulated Load and Adapter
Fittings (UpRight P/N 67040-000)
Inclinometer
4.0
4.1 Preventative Maintenance
(Table 4-1)
The Complete inspection consists of periodic visual and
operational checks, together with all necessary minor
adjustments to assure proper performance. Daily
inspection will prevent abnormal wear and prolong the
life of all systems. The inspection and maintenance
schedule is to be performed at regular intervals. Inspec-
tion and maintenance shall be performed by personnel
who are trained and familiar with mechanical and
electrical procedures.
Before performing preventative mainte-
nance, familiarize yourself with the opera-
tion of the machine.
Always block the elevating assembly when-
ever it is necessary to enter the scissor
assembly to perform maintenance while
the platform is elevated.
The preventative maintenance table has been designed
to be used primarily for machine service and mainte-
nance repair. Please photocopy the following page and
use this table as a checklist when inspecting the machine
for service.

Upright LX31 Specifications

General

Brand	Upright
Model	LX31
Category	Lifting Systems
Language	English