Utax 2550ci

Sending Functions
6-18
Density
Use the procedure below to adjust the density when scanning the originals.
You can adjust density using 13 levels.
The procedures for adjusting the density is explained below.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [Density].
4 Press [-3] to [+3] (Lighter - Darker) to adjust
density.
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
Darker
Density
Auto
NormalLighter
Cancel OKAdd Shortcut
Status
Destination
0 +1 +2 +3
-1
-2-3
-2.5 -1.5 -0.5 +0.5 +1.5 +2.5
100%
A4
A4
Preview
Original
Zoom
Send
:
:
:
12/12/2011 10:10