Default Setting (System Menu)
9-76
Time Zone
Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Time Zone.
3 Select the location.
4 Press [Off] or [On] of Summer Time and press [OK].
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
Auto Panel Reset
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Auto Panel Reset.
3 Press [Off] or [On].
4 Press [OK].
NOTE: Press [ ] or [ ] to select the location.
NOTE: If you select a region that does not utilize summer time, the summer time setting screen will not
appear.
NOTE: Refer to page 9-16 for the default settings.
To Next Page
Loading...
Need help?
General
