To Next Page

To Previous Page

Basic Operation

3-2

If user login administration is enabled, it is necessary to enter the login user name and password to use the

machine.

1 If the screen shown appears during operations,

press [Login User Name].

Press [# Keys] to enter the login data using the

numeric keys.

2 Enter the login user name and press [OK].

3 Press [Login Password].

Press [# Keys] to enter the login data using the

numeric keys.

4 Enter the password and press [OK].

5 Check the login user name and password are

correct, and press [Login].

NOTE: You will be unable to login if you forget your login user name or login password. In this event, login

with administrator privileges and change your login user name or login password. The login user name and

If the guest authentication setting is enabled, the Authentication/Logout key must be pressed when logging in.

For details, refer to the Guest Authorization Set. on page 10-12.

User Name

Status

Enter login user name and password.

Password

abcdef

********

Local

# Keys

ID Card

CancelCheck Counter

# Keys

12/12/2011 10:10

NOTE: Refer to the Character Entry Method on

Appendix-6 for details on entering characters.

NOTE: If Network Authentication is selected as the

user authentication method, either Local or Network

can be selected as the authentication type.

Utax 2550ci User Manual

Questions and Answers: