Copying Functions
4-32
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high
quality print is unnecessary.
The procedure for making copies using EcoPrint is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [EcoPrint].
4 Press [On].
5 Press [1] to [5] (Low - High) to adjust the Toner
Save Level.
6 Press [OK].
7 Press the Start key to start copying.
Single Color
Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless of
original type.
Follow the steps shown below for Single Color Copy.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Color/Image Quality], [Color Selection] and
then press [Single Color].
4 Select color for copying from [Cyan], [Magenta],
[Yellow], [Red], [Green] or [Blue].
5 Press [OK].
6 Press the Start key. Copying begins.
To Next Page
Loading...
