Basic Operation
3-8
Copying
Follow the steps as below for basic copying.
1 Press the Copy key.
2 Place the originals on the platen or in the optional
document processor.
3 Check that [Auto] is selected of Paper Selection on
the touch panel. Paper that matches the size of the
original will be selected automatically.
To change the paper size, press, [Org./Paper/
Finishing], [Paper Selection] and select the desired
paper source.
4 Use the numeric keys to enter the copy quantity.
Specify the desired number up to 999.
5 Press the Start key to start copying.
NOTE: If the touch panel is turned off, press the
Energy Saver key or the Power key and wait for the
machine to warm up.
NOTE: For loading instructions, refer to Loading
Originals on page 2-40.
To Next Page
Loading...
Need help?
General
