Utax 2550ci

Basic Operation
3-9
3
Density
Use this procedure to adjust the density when copying.
You can adjust density using 7 or 13 levels.
The procedure for adjusting the density of copies is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Set the original on the platen and press [Color/
Image Quality] -> [Density].
4 Adjust density pressing [-3] (Lighter) to [+3]
(Darker). You can change the density level [-3]
(Lighter) to [+3] (Darker) in half-steps.
5 Press [OK].
6 Press the Start key. Copying begins.
Status
Copies
Add Shortcut Cancel OK
Darker
Density
Normal
Lighter
-3 -2 -1 0 +1 +3+2
-2.5 -1.5 -0.5 +0.5 +1.5 +2.5
100%
A4
A4
Preview
Original
Zoom
Paper
:
:
:
12/12/2011 10:10