Troubleshooting
12-29
12
Job Separator
Follow the steps below to clear paper jams in the job separator.
1 Pull up right cover 1 lever and open the right cover
1.
2 Open the fuser cover, and remove the jammed
paper.
If the paper tears, remove every loose scrap from
inside the machine.
3 If jammed paper is seen through the paper ejection
slot of the job separator, pull it toward your side to
remove it.
If the paper tears, remove every loose scrap from
inside the machine.
4 Push the fuser cover back in place, and close right
cover 1.
CAUTION: The fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.
To Next Page
Loading...
Need help?
General
