Status / Job Cancel
8-13
8
Checking the Remaining Amount of Toner and Paper (Paper/Supplies)
Check the remaining amount of toner, paper, and staples on the touch panel.
Use the procedure below to check the remaining amounts.
1 Press the Status/Job Cancel key.
2 Press [Paper/Supplies]. Check the remaining
amount of toner and the status of the waste toner
box in Toner Information, and the remaining
amount of paper in each paper source in Paper.
The items you can check are described below.
Remaining amount of toner
You can check the remaining amount of each color toner levels from 100 to 0% (1% increments).
Status of the waste toner box
You can check the status of waste toner box.
Paper
You can check the size, orientation, type, and remaining amount of paper in each paper source. The remaining
amount of paper is shown by 4 levels as 100, 70, 30, and 0%, however, the paper in the multi purpose tray is
shown by 2 levels as 100% and 0%.
Others
You can check the status of staples.
NOTE: In the event that an error appears on the
touch panel, press [Hold] to display the status screen
and check the job details screen.
To Next Page
Loading...
Need help?
General
