Utax 2550ci User Manual

Management
10-16
4 Press [Next] of User Login Setting, [Change] of
Obtain NW User Property.
5 Press [On].
6 Press [Server Name].
7 Enter the LDAP server name or the IP address and
press [OK].
8 Press [# keys] to enter the LDAP port number using
the numeric keys.
9 Press [Name 1].
10 Enter the LDAP Attribute to obtain the user name to
be displayed and press [OK].
11 Follow steps 9 and 10 above to set [Name 2].
12 Press [E-mail Address].
13 Enter the LDAP Attribute to obtain the e-mail
address and press [OK].
14 If you set the server type to [Kerberos], press
[Authentication Type] and set the authentication
method.
15 Press [Search Timeout] to set the amount of time to
wait before time-out.
16 Press [+], [-] or the numeric keys to enter the time
and press [OK].
17 Press [LDAP Security] to select the type of
encryption according to the type of security
employed by the LDAP server.
18 Select [Off], [SSL/TLS], or [STARTTLS] and press
[OK].
User Login/Job Accounting - Obtain NW User Property
Get the network user information.
On
Off
Cancel OK
Server Name
Search
Timeout
LDAP
Security
LDAP Server Information:
E-mail
Address
Port:
Name 2
Name 1
Acquisition of User Information:
Status
# Keys
displayName
mail
192.181.11.11
389
30
Off
sec.
Authenticat
Type
Simple
12/12/2011 10:10

Utax 2550ci Specifications

General

Brand	Utax
Model	2550ci
Category	All in One Printer
Language	English