DE35-ST Operating Instructions
D292469I 11
11. Do not use machine in the vicinity of a gas leak - If you suspect a gas leak,
report it immediately, but use a telephone away from the area where gas is
leaking.
12. Use only the correct power source as marked on the machine - If you are not
sure of the power supply; consult your local power company. If the machine
uses a wall plug-in transformer, use only the transformer supplied.
13. Your wall outlet must only accept a polarized, three-prong grounded-plug -
Such plugs are designed for your safety. Do not attempt to defeat this purpose.
If you cannot insert the plug easily, an electrician should replace your outlet.
14. EMO switch cables must be plugged in correctly - PC monitor and illuminator
must be plugged into the mainframe (not into the wall) to ensure that they are
shut off if EMO switch is engaged.
15. Moving and lifting the DE35 ST - The DE35 ST mainframe weighs 205 lbs (93 kg).
Moving or lifting the system requires four individuals, with one positioned at
each corner of the machine.
Moving and lifting the DE35 300 - The DE35-300 mainframe weighs 430 lbs (195
kg). Moving or lifting the system requires a mechanical lifting system. Do NOT
attempt to move the machine manually.
To Next Page
Loading...