72 D292469I
Erasing Unwanted Pattern Numbers
To make room in the list for new user programmed pattern numbers, you may need to
erase old pattern numbers which are not currently active.
1. Select the pattern number to be erased in the
menu, either by keying the pattern number
into the pattern number line in the menu or by
browsing through the list with the Left/Right
Arrow keys.
2. Press the YES key and overwrite the old
pattern number with "000000-00". All pitch
and pocket count values will be returned to
zero.
3. Use the Up/Down Arrow keys to move
through the menu to the SAVE
CONFIGURATION? line. Press the YES key and the old pattern number will be
erased and this memory "pigeon hole" will now be available for storing a new
waffle pack pattern number.
4. To exit the menu at any time, press the YES key when the cursor > is pointing at
the QUIT MENU line. You can quickly get to this line from any line in the menu
by pressing the NO key or by using the Up/Down Arrow keys.
NOTE: You can only quit from the menu if the output dimensions you have
chosen are realistic.
To Next Page
Loading...