132 D292469I
Appendix B: Table of Recommended Pick-Up Tips
Royce Instruments pick-up tools are compatible with all Royce DE35, AP+, MP300 and
A45 systems. Vacuum is applied through the pick-up tip to hold the die in place during
contact. Pick-up tools differ in material and geometry in order to meet varying die transfer
needs. All pick-up tools are designed for quick changeover, and attach to the pick-up head
with a simple set screw. Standard pick-up tip materials and dimensions are listed below.
Custom pick-up tools are also available in customer-specified dimensions upon request.
When selecting a pick-up tip, the tip inner diameter should be smaller than the device
width and the outer diameter should not more than 0.002 inch larger than the die width.
To Next Page