V-TEK Royce DE35-ST - Pickup Head Adjustment; Adjusting Pickup Height and Position

To Next Page

To Previous Page

DE35-ST Operating Instructions

D292469I 73

Changing Output Configuration

To change the output configuration of the DE35 ST, press the OUTPUT SELECT key. This

will display two lines of the Output Select Menu with the cursor > pointing to Quit

Menu.

1. Arrow down to Output Plate Configuration, press YES.

2. With this line active, use the + / – keys to scroll through the possible selections.

• 4 Trays, 2 in. Plate 3105

• 2 trays, 2 in vacuum release Plate 13784

• 1 Trays, 4 in. Plate 3084

• 2 Trays, 4 in. Plate 5089

• 2 Trays, 4 in. vacuum release Plate 16712

• 2 Vials Plate 9948

• 1 Substrate Plate 13472

• Wafer Output Type 8 Plate 5528

• Wafer Output Type 7 Plate 12758

• Wafer Output Type 27 Plate 13679

• Wafer Output Type 7, 29 Plate 14460

Note: Once the Output Plate is changed, any calibrations made for that plate will

be lost. It is recommended to use a separate process recipe for each different

Output Fixture in order to maintain calibrations when changing from one process

to the next.