V-TEK Royce DE35-ST - Eject Needle List

128 D292469I
Eject Needle List
How to determine the right eject needle for your application:
1. Determine the eject head diameter and/or the needle length.
2. Determine the needle diameter.
3. Determine the needle tip radius (.001 inch is standard for most
applications)
4. Select needle from list below
NOTE: Compatibility with non-Royce eject heads not guaranteed.
Eject
Head
Size
Needle
Length
Needle
Diameter
(Inches)
Eject Needle
Part Number
Nominal
Tip Radius
(Inches)
Notes
EN-1-01653
0.001 Standard Needle
EN-1-14539 0.002
Non-Standard Needle
EN-1-15891 0.003 Non-Standard Needle
EN-1-14540 0.004 Non-Standard Needle
EN-1-10922
0.005
Non-Standard Needle
EN-1-11274 0.008 Non-Standard Needle
EN-1-16539 0.010 Non-Standard Needle
EN-1-11001 0.017 Standard Needle and NSC stop pin
EN-4-01656 0.001 Standard Needle
EN-4-24452
0.002
Non-Standard Needle
EN-4-24453 0.003 Non-Standard Needle
EN-4-24454
0.004
Non-Standard Needle
EN-4-15403
0.005
Non-Standard Needle
EN-4-14961 0.008
Non-Standard Needle
EN-4-12894 0.010 Standard Needle and NSC stop pin
EN-3-01655 0.001 Standard Needle
EN-3-15278 0.002 Non-Standard Needle
EN-3-14542
0.003
Non-Standard Needle
EN-3-14780
0.004
Non-Standard Needle
EN-3-08048 0.005 Standard Needle and NSC stop pin
EN-3-14944 0.008 Non-Standard Needle
EN-2-01654
0.001
Standard Needle
EN-2-21685 0.003 Non-Standard Needle
EN-2-14649 0.005 Non-Standard Needle
EN-2-14660 0.008 Non-Standard Needle
EN-2-12806 0.010 Non-Standard Needle
EN-2-10964 0.017 Standard Needle and NSC stop pin
EN-7-03443 0.001
Standard Needle
EN-7-17136 0.002 Non-Standard Needle
EN-7-24490 0.003 Non-Standard Needle
EN-7-24491 0.004 Non-Standard Needle
EN-7-12604 0.005 Non-Standard Needle
EN-7-24492 0.008
Non-Standard Needle
EN-7-12855 0.010 Standard Needle and NSC stop pin
0.062 EN-8-03765 0.001 Non-Standard Needle
0.75 inch diameter
1.5 Inch diameter
0.034
0.020
At tip:
0.010
At ba s e:
0.034
1.165 Inches
0.425 Inches
0.034
0.02