Vacon 100 - Page 86

12 If you use many cables on one connector, put the
cable lugs on top of each other.
A
C
B
A. The first cable lug
B. The second cable lug
C. The connector
13 Expose the shield of all 3 cables to make a 360-
degree connection with the grounding clamp for
cable shield.
14 Attach again the EMC shield plate. For MR9, attach
the sealing plate.
VACON · 86 POWER CABLING
5
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205