Vacon NX User Manual

6
vacon • 114 Electrical cabling and connections
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
Table 47. Connections from mains device to drive
Chassis Type
Connection
Conductor cross section
[mm
2
]
Busbar size
(flexible connection)
Busbar size
(bare Cu)
CH3
0016_5
6
0022_5
0031_5
CH3
0038_5
10
0045_5
0061_5
CH4
0072_5
25
0087_5
0105_5
CH4 0140_5 50
CH5 0168_5 70
2*24*1
CH5 0205_5 95
CH5 0261_5 120
1*50*5
CH61 0300_5
2*70
5*32*1
CH61 0385_5
CH72 0460_5 2*95
CH72 0520_5 2*120
CH72 0590_5 2*150
1*80*5CH72 0650_5
2*(6*40*1)
CH72 0730_5
CH63 0820_5
1*100*5
CH63 0920_5
CH63 1030_5
CH63 1150_5
CH74 1370_5
2*100*5
CH74 1640_5
CH74 2060_5
3*100*5
CH74 2300_5

Vacon NX Specifications

General

Product Type	AC Drive
Control Method	Scalar Control
Enclosure	IP00, IP21
Communication	Ethernet
Safety	STO (Safe Torque Off)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Ambient Temperature Range	-10°C to +50°C (with derating above +40°C)
Cooling Method	Air-cooled, Liquid-cooled