Vacon NX User Manual

1
vacon • 6 Safety
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
1. SAFETY
ONLY A COMPETENT ELECTRICIAN MAY CARRY OUT THE ELECTRICAL
INSTALLATION!
1.1 Safety symbols used in the manual
This manual contains warnings and cautions, which are identified with safety symbols. The
warnings and cautions give important information on how to prevent injury and damage to the
equipment or your system.
Read the warnings and cautions carefully and obey their instructions.
= DANGEROUS VOLTAGE!
= GENERAL WARNING!
9000.emf
9000.emf
13006.emf

Vacon NX Specifications

General

Product Type	AC Drive
Control Method	Scalar Control
Enclosure	IP00, IP21
Communication	Ethernet
Safety	STO (Safe Torque Off)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Ambient Temperature Range	-10°C to +50°C (with derating above +40°C)
Cooling Method	Air-cooled, Liquid-cooled