7
vacon • 128 Control keypad
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
The order of the faults is indicated by the location indication in the upper left corner of the display.
The latest fault carries the indication F5.1, the second latest F5.2 etc. If there are 30 uncleared faults
in the memory the next occurring fault will erase the oldest from the memory.
Pressing the Enter button for about 2 to 3 seconds resets the whole fault history. Then, the symbol
H# will change to 0.
Figure 67. Fault history menu
7.3.6 System menu (M6)
The System menu can be entered from the main menu by pushing the Menu button right when the
location indication M6 is visible on the display.
The controls associated with the general use of the AC drive, such as application selection,
customised parameter sets or information about the hardware and software are located under the
System menu. The number of submenus and subpages is shown with the symbol S (or P) on the
value line.
On page 129 you will find a list of the functions available in the System menu.
To Next Page
Loading...
Need help?
General
